On-vehicle system for acquisition strain, and voltage signals

The Motomea RDS are full turnkey systems, which fully implement standards IEC 60034-2-1, CSA_C390, IS 12615, and IEEE 112. The scope of the RDS is comprised of: AC induction servomotors as loading motors with high-resolution encoders, high-accuracy torque sensors, integrated power analyzers, and temperature measurement modules by milliohm meters and/or thermocouples. Motomea RDS provides energy recovery benefits, and the multi-drive common bus configurations can reduce input power requirements for applications where an AC dynamometer is used for the prime mover and absorber.

Worldwide patented systems "Inertial Dynamometer" performing the complete load tests without any load, for all motor types, Paving a new era for testing electric motors.

The MOTOMEA Electric Powertrain Dynamometer is part of a fully integrated modular system with hardware-in-the-loop testing. System capabilities include drive cycle and virtual test driving. Powertrain testing capabilities also include battery testing and simulation using bidirectional DC power supply.

As a leading motor testing company, we're proud to introduce our latest innovation: Portable IDS, from our Inertial Dynamometer Systems. With the Portable IDS suitcase, we're revolutionizing motor testing by offering a portable solution that can be used anytime, anywhere. This system enables testing of motors on the go, allowing for unprecedented flexibility and convenience.

The model BST 10L is a uniaxial accelerometer based on piezo resistive technology. This accelerometer meets SAEJ211 specifi- cations for instrumentation for impact testing. The fully Wheat- stone-Bridge (4 wire system) configuration helps to connect the sensor on all data acquisition systems. The very light weight and small size of the sensor makes it easy to mount it on difficult positions at the car for a crash test or for shock test application.

The model BST 16C is a uniaxial accelerometer based on piezo resistive technology. This accelerometer is designed for impact testing. The fully Wheatstone-Bridge (4 wire system) configura-tion helps to connect the sensor on all data acquisition sys-tems. The very light weight and small size of the sensor makes it easy to mount it on difficult positions at the car for a crash test or for shock test application.

The model BST 11CF is a uniaxial accelerometer based on piezo resistive technology. The fully Wheatstone-Bridge (4 wire system) configuration helps to connect the sensor on any data acquisition systems. The very light weight and small size of the sensor makes it easy to mount it on difficult positions at the car for a crash test or for Test-Bed application.

The new model BST 23C is a triaxial accelerometer based on piezo resistive technology. The fully Wheatstone-Bridge (4 wire system) configuration helps to connect the sensor on any dataacquisition systems. The very light weight and small size of the sensor makes it easy to mount on difficult positions at the car for a crash test or for Test-Bed application.

Intelligent vibration transmitter
Frequency response: 1 Hz to 1,000 Hz

Accepts inputs from accelerometers, piezovelocity sensors, and combined acceleration + temperature sensors
Can be configured to monitor high or low speed machinery (0.2 Hz - 20,000 Hz)
Easily monitor multiple faults using the two bands with independently configurable filters and selectable integration.
Simple transmitter configuration using a laptop or PC with a compatible web browser; no standalone software required
500 VAC isolation between power, input, and outputs reduces noise caused by ground loops

Intelligent vibration transmitter
Frequency response: 2 Hz to 2,000 Hz

High speed, high-performance, flexible and portable. The JT37x7/TSI JTAG Boundary-scan controller system features three PC interface standards: USB, Ethernet and Firewire, all housed in a robust desk-top package.

JTAG ProVision is a complete solution for boundary-scan testing, PLD programming, and Flash in-system programming. It supports over 40 EDA/CAD systems, extensive libraries for non-JTAG devices, and includes an integrated sequencer to simplify production-ready test and programming plans. Available as a full suite or through specific licenses.

BSD Test Diagnostics software can be added to either developer or factory run-time systems to further improve the location of faults such as net bridges (short-circuits), open pins, open nets and even ‘twisted’ connections that can occur within cable assemblies. BSD test diagnostics reports any faults in a verbose English language statement with pin-level information included and can easily interpret multiple fault conditions.

CoreCommander routines take control of key processor core (e.g. ARM, PPC, X-scale, Cortex etc.) functions using the built-in emulation/debug functions found in today’s RISC and DSP cores. They have been developed to speed-up board testing and debug by enabling kernel-centric testing.

SIRIUS® modular is the world's most versatile and powerful data acquisition system. SIRIUS® provides high-end signal conditioning amplifiers for almost any signal and sensor. SIRIUS data acquisition systems are truly the latest in DAQ technology and offer high dynamic range (160 dB), galvanic isolation, etc. They are available in USB or EtherCAT® configurations.

SIRIUS XHS is a high-speed data acquisition system (15 MS/s) with the new HybridADC signal conditioning technology capable of high-bandwidth transient recording and very high-dynamic, alias-free data acquisition.

Extremely rugged data logger and powerful data processing computer with IP67 degree of protection and wide temperature rating of -40 to +50 °C. SBOX waterproof is a perfect companion to the SIRIUS waterproof data acquisition systems.

Rugged and distributed EtherCAT data acquisition system for field measurement in extreme and harsh environments. KRYPTON DAQ systems offer IP67 degree of protection and can operate in the extreme temperature range from -40 to +85°C and offer high 100G shock protection.