During manufacture, 22 caliber rimfire cases are filled with an impact-sensitive primer in a wet state so that the primer is stable. This primer then needs to be dried so it will detonate when the gun is fired. A continuous oven with two conveyors that carry pallets containing 300 casings every 8 seconds was requested.

A major textile manufacturer ordered Despatch TAD3-10 walk-in ovens with drawers added to allow tools to be easily removed when needed and placed back in the oven when they cool.

This custom PCE conveyor oven was designed for curing fuel cells in batteries. Extremely tight uniformity and low air knifing was required because of the light product weight. Access doors were located on one side for inspection and chamber access, as well as for explosion relief.

Products may be moved into and out of ovens by a wide variety of material handling equipment. Despatch can engineer custom truck solutions from simple manual systems to complex automated systems.

Manufacturers of ICs, RAM and ROM modules, microprocessors and other semiconductor devices use ovens to test or burn-in their devices at elevated temperatures to identify early product failures and ensure long-term reliability.

A chemical manufacturer needed a walk-in oven for heating metal oxides designed to hold high pressure with a completely sealed interior. A condensation drain was built into the door to handle any moisture which would condense on the door and front.

The infrared pyrometer optris CS LT is ideally suited for non-contact temperature measurements in small and narrow environments. The robust sensing heads measure temperature from -50 °C to 1030 °C. With a high distance-to-spot size ratio of 15:1, the CS LT offers small spot sizes from far distance.

The CSmicro LT pyrometer offers an economical yet advanced solution for infrared temperature measurements in industrial settings. Its thermopile detector provides accurate infrared non-contact temperature readings across a wide spectrum from 8-14µm, ideal for high-emissivity targets even at low temperatures.

The CSmicro LTH pyrometer is a prime choice for infrared temperature measurements in industrial environments. Its special thermopile detector enables precise non-contact temperature sensing across a broad 8-14µm spectrum, particularly excelling with high-emissivity targets in a temperature range from -50 °C to 1030 °C.

The CSmicro LT hs pyrometer sets a new standard in temperature resolution, pushing the boundaries of low-noise infrared pyrometry to achieve remarkable precision. The thermal sensor can detect temperature variations as subtle as 0.025 °C, particularly with high-emissivity targets, offering precise and detailed non-contact sensing across the 8-14µm infrared spectrum. While it remotely measures temperatures of infrared targets within a temperature range of -20 °C to 150 °C, the sensor head operates from -20 °C to 75 °C.

The Optris CSmicro 2M pyrometer is designed for temperatures from 250 °C to 1600 °C, excelling in accurately measuring metal temperatures with a specialized spectral range around 1.6 µm. The compact pyrometer allows easy installation in tight spaces, making it ideal for integration into machinery, measuring hot metals like steel, tungsten, and iron.

The Optris CSmicro 3M pyrometer accurately measures temperatures from 50 °C to 600 °C, specializing in gauging metal temperatures with its 2.3 µm spectral range. Its compact design allows for easy installation in tight spaces, frequently used in applications with hot metals like steel, tungsten, iron, nickel, brass, and composites.

Safety is the top priority, and the Optris CT series pyrometer addresses this with its version CTex, which can be used in hazardous area (ATEX) where typically explosion-proof sensors must be installed.

The Optris CTfast LT pyrometer quickly captures non-contact temperature data remotely. Its remarkably short response time of 6 ms makes it an ideal choice for applications requiring speedy measurements.

The Optris CT 1M pyrometer accurately measures temperatures from 485 °C to 2200 °C across different variants. Its specialized spectral range, compact size, and rapid response time suit hot metal applications.

The Optris CT 2M pyrometer, with its short-wavelength technology, ensures precision by being insensitive to emissivity variation and boasting high optical resolution. Available in variants to measure temperatures from 250 °C to 2000 °C, it caters to various ranges: 2ML (250 °C...800 °C), 2MH (385 °C...1600 °C), and 2MH1 (490 °C...2000 °C).

The Optris CT 3M is a reliable, non-contact temperature measurement solution. It is particularly adept at handling challenging materials in low-temperature environments, with a focus on metal applications.

The quick exposure time of only 90 μs makes the high speed IR thermometer CT 4M the perfect sensor for measuring fast processes.

The Optris CT G5 pyrometer is designed for precise temperature measurement in glass-related industries, featuring a two-piece sensor design with a separate electronic box for integration-friendly operation.

The Optris CT P3 pyrometer is designed for precise temperature measurement of thin plastic films, utilizing a spectral range of 3.43 µm for accuracy between 50 °C and 400 °C. While plastics thicker than 0.4 mm and pigmented films are easily measured in the long-wavelength IR spectral range, very thin plastic films are transparent in this spectral range.